If you want to improve the Internet coverage you can try different options. One of the most popular nowadays is PLC. This kind of device allows the Internet signal to travel through electrical wires, amplifying the WiFi reach. There are some common mistakes people make when setting PLC devices. They are very delicate devices so you must be careful when handling them.
In this guide we will talk about the setting of PLC devices as well as the common mistakes and how to avoid them. The main goal is to understand how PLC works and take advantage of its features.
Common mistakes with PLC WiFi devices: home appliances interferences
It’s very important to connect PLC devices away from other home appliances. If we just connect the PLC to an outlet, the surrounding home appliances may interfere with the signal. A PLC is very sensitive to outward influences. The connection will work slowly or suffer micro cuts if there’s interference.Do not plug the PLC near a television or DVD player. If the device uses the same WiFi bandwidth it may alter significantly the performance of the PLC.
The best way to avoid PLC problems is to connect it isolated from other devices. Do not use power strips and as far as possible from other electronic devices. Sometimes we use power strips for comfort, but sensitive devices such as PLC WiFi amplifiers do not work properly.
The sensitivity of PLC is the main reason for these considerations before connecting the device. You should follow these advices for the correct performance of a PLC WiFi:
- Do not use power strips.
- Do not plug them near a enclosed wall.
- Set the correct WiFi bandwidth.
- Check the wiring status.
If you follow these tips and place the PLC correctly you will have a better connection and WiFi coverage. The use of PLC helps to improve the Internet resources available for connecting computers, TVs and other wireless Internet devices. The most common mistakes in PLC use can be avoided with just a little patience.